However no sources are released with DGTeam anymore which is a little disappointing (and perhaps a GPL violation?).

With no access to the forum it is still unclear what the future holds for the project. Hopefully it moves forward and the sources are made public once again!

-_-

It will be rare to see another.

Luckily I have mirrored a copy of 1018 I had floating around.

DGTeam 1018 for DG834GT

If anyone happens to have other versions or more importantly the sources I will happily mirror them in honour of the DGTeam project.

It goes without saying ‘Thanks for the firmware!’ to Stev-o and the rest of the team for such a great firmware. It will be missed.

Here is the solution to this problem for Netgear DG834GT users though it should work fine with mostly any DG834 based router.

You can download our pre-made image here.

The credit for this cannot go entirely to myself – it is compiled from various sources and is based on the half-bridge script from RouterTech firmware. Thanks to both DGTeam and RouterTech for the nice firmwares they release.

As always, if you can add to or improve on this your comments are welcome!

Note: We have mirrored the sources in our downloads section for convenience but please download the latest copy from DGTeam!

First, download and untar DGTeam firmware:

wget http://modernadmin.com/downloads/firmware/netgear/DG834GT/DG834GT_V1.02.16_DGTeam_0848_sources.tar.bz2
tar xjf DG834GT_V1.02.16_DGTeam_0848_sources.tar.bz2
cd DG834GT_V1.02.16_DGTeam_0848_sources
tar xjf target_dgteam.tar.bz2

Add our half-bridge script:

mkdir target_dgteam/usr/etc/ppp

cat <<EOF > target_dgteam/usr/etc/ppp/ip-up
#!/bin/sh
/bin/cp /proc/uptime /tmp/wan_uptime
/usr/sbin/rc service restart
#/bin/cp /proc/uptime /tmp/wan_uptime
/bin/cp /usr/etc/ppp/ip-down /etc/ppp/
/bin/echo g5on > /proc/led
/usr/sbin/hbStart.sh
EOF

cat <<EOF > target_dgteam/usr/etc/ppp/ip-up-demand
#!/bin/sh
/bin/cp /proc/uptime /tmp/wan_uptime
/usr/sbin/rc service restart
/bin/cp /usr/etc/ppp/ip-down /etc/ppp/
/bin/echo “/usr/sbin/atm_monitor” >>/etc/ppp/ip-down
/bin/echo g5on > /proc/led
/usr/sbin/hbStart.sh
EOF

add to target_dgteam/usr/sbin/hbStart.sh:

cat <<EOF > target_dgteam/usr/sbin/hbStart.sh
#!/bin/sh

IFC=/sbin/ifconfig
IPT=/usr/sbin/iptables
RTE=/sbin/route

WIF=ppp0
LIF=br0

iKx=$($IFC $WIF|grep inet)
iKMK=${iKx#*k:}
iKx=${iKx#*r:};WIP=${iKx%% *}
iKx=${iKx#*P:};GW=${iKx%% *}

$IFC ${WIF:=ppp0} 0.0.0.0
$RTE add -host $WIP dev $LIF
$RTE add -host $GW dev $WIF
$RTE add default gw $GW

/bin/echo “1″ >/proc/sys/net/ipv4/conf/$WIF/proxy_arp
/bin/echo “1″ >/proc/sys/net/ipv4/conf/$LIF/proxy_arp
EOF

Set permissions:

chmod +x target_dgteam/usr/sbin/hbStart.sh

Lastly, Pack firmware image:

./create_target.sh 1.02.16 GT
./build_dgteam.sh 1.02.16 GT

You should now find the .img file in the current folder like follows: DG834GT_V1.02.16_DGTeam_0921.img

Enjoy!